LATICRETE® SELECT-BOND™ Adhesive
A polymer modified tile and stone adhesive that can be used for both thin bed and Large Heavy Tile applications.
$ 10.50 – $ 11.53
Item No.: 2700-0025-21
attribute_pa_color_finish: grey
Item No.: 2700-0025-22
attribute_pa_color_finish: white
A polymer modified tile and stone adhesive that can be used for both thin beds and Large Heavy Tile applications. Designed to be used alone or mixed with one of three optional LATICRETE® SELECT-BOND™ Adhesive System Kits for additional performance enhancements — Non-Sag, Rapid and High Performance (ANSI A118.15).
When used alone (without an additional LATICRETE SELECT-BOND System Kit), the LATICRETE SELECT-BOND Adhesive provides a one-step installation for ceramic tile, porcelain tile, marble and stone on floors and walls. Approved for use over exterior glue plywood for interior installations.
Shipping & Delivery Times
To determine approximate delivery time for your order shipped via UPS Ground, please locate the zone where the Ship-To address for your order is located. Note the color of that zone then check the number of days listed next to the color in the Transit Days Chart on the bottom right of the Zone Map. Please note that the delivery time is calculated beginning the day after your order has shipped.
- For both thin bed and Large and Heavy Tile applications
- Exceeds ANSI A118.4 H and ANSI A118.11
- Exceeds ISO/EN 13007-2 requirements for C1
- For interior and exterior floor and wall applications
- “Extra Heavy” rating per ASTM C627
Packaging Sizes:
- 25LB (11.3KG) BAG
Be the first to review “LATICRETE® SELECT-BOND™ Adhesive”
You must be logged in to post a review.
Reviews
There are no reviews yet.