Blanke Aqua Shield Waterproofing Fabric – 323 sq. ft. Roll (3.28’x94.4′)

TILE PRO RATING: GoodBetterBest

Avoid the cure time waits between coats and concerns about achieving minimum coverage common with liquid applied water proofing membranes with Blanke Aqua Shield! If you see blue you know it’s waterproofed!

Roll (323 sq. ft.)

$ ($1.26/sq.ft.) 407.48

Item No.: 511-905-1000

Qualifies For

Browse Wishlist

Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; the Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners.

Use the best waterproof application to any wet surface to eliminate leaks

Gone are the days when you were using the traditional methods of waterproofing the bathroom. You can now order the best shield that sits between your wall and floor tiles and concrete structure. Aqua shield waterproofing is a complete solution to all the leaks and seepages in wet areas. 

The fabric is a high tensile sturdy material that makes the walls durable because of its special German engineering technology. Intricately cut the corners of the aqua shield membrane adhesive to ensure a seamless joint. 

How to install an aqua shield membrane?

When searching for an easy-to-use material that can waterproof our wet areas like bathrooms and kitchen, Blanke Aqua Sheild shower waterproofing is the answer. You apply a fine flat waterproof membrane on the dry surface to ensure vapor and mold-free walls and ceilings for years to come. The fabric is applied to the surface using a thin set mortar. The steps of installing the fabric are simple –

  1. Clean the substrate to ensure that the surface is flat, dry robust. 
  2. Treat the drains and open pipes
  3. Cut the fabric as per the size measured
  4. Secure the corners and joints and check for leaks (if any)
  5. Start fixing the shield – wall to wall then wall to floor connections
  6. Apply a thin-set mortar over the surface
  7. Press the shield firmly so that it fits perfect
  8. Use a trowel to remove any air gaps
  9. Run the trowel over the entire shield surface in the diagonal direction
  10. Ensure that the joints/corners overlap by two inches 
  11. Spread the thin-set on the surface and set the fabric on top of it
  12. Every application is subject to the moist condition 
  13. Secure the corners with waterproof adhesive  

What are the Pros of aqua shield shower waterproofing membrane?

  • Cost-effective 
  • Easy to install
  • Natural vapor resistant
  • Flexi design (easy to cut and resize)
  • Zero cure time
  • Mold resistant
  • UV stabilizer
  • Acts as a barrier to chemical reactions
  • Multiutility in kitchen, bathroom, wet areas like swimming pool
  • No wait time for installing tiles
  • Crack isolation and uncoupling properties 
  • Fabric thickness is consistent throughout

More information about the aqua shield fabric – technical data

Plywood, concrete drywall, backer board, and cement are the surfaces on which you can apply the. Waterproofing fabric. The Blanke Aqua Shield fabric is exceptionally fine. Made from Polyethylene film with fleece on one side. The thickness is approximately and weighs less. A standard is around , and a smaller is about what are the US measurement equivalents?. The membrane comes in a light blue shade. 

Areas of application

Aqua Sheild waterproofing can secure many places, starting from the kitchens and bathrooms to wellness centres. Some popular areas for using, balconies, open terraces, canteens and eating joints, spa and pool sides.

  • No waiting. Apply the Aqua Shield and start tiling
  • Minimum coverage guarantied
  • Latex modified thinset recommended
  • Pre-formed corners, tape and other accessories available for ease of installation.

Reviews

There are no reviews yet.

Be the first to review “Blanke Aqua Shield Waterproofing Fabric – 323 sq. ft. Roll (3.28’x94.4′)”