Laticrete VAPOR BAN™ Primer ER
All-In-One Moisture Vapor Barrier and Primer Applied in One-Step! LATICRETE VAPOR BAN™ Primer ER is a single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs.
- Item No.: 0913-0003-2
All-In-One Moisture Vapor Barrier and Primer Applied in One-Step! LATICRETE VAPOR BAN™ Primer ER is a single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs. This product also requires minimal to no surface preparation! It consolidates the application of a moisture barrier and primer from two steps into one! It will also perform as an epoxy primer for concrete before installing self-leveling underlayment products such as NXT Level and LATICRETE® SUPERCAP®.
Since 2019, when Laticrete first introduced its latest construction solution at Coverings Trade Show – the Vapor Ban Primer ER – there has been no looking back. A fast-curing moisture vapor barrier Laticrete Vapor Ban Primer ER is well-known for its rapid drying properties, and today it’s one of the top-rated and most sought-after construction solutions. It takes three to four hours to dry, which makes it the perfect solution to be used in projects with tight schedules — facilitating single-day installation of coating systems that can address moisture issues. This Laticrete primer can easily be incorporated as a base coat in any SPARTACOTE viscous flooring systems for embellished and shielding applications, or it can also be used separately as a protection for any moisture-sensitive finished flooring.
Tile Pro Depot at their online tile and stone installation products store is a one-stop destination for all your tile and stone installation stores. As an all-in-one moisture vapor barrier and primer, Laticrete Vapor Ban Primer ER is uniquely designed to control the moisture vapor emission rate from brand new as well as existing concrete construction. The best thing about this product is that – first, it requires very minimum or almost no surface preparation, and second, it is a combination of a moisture barrier plus primer. So technically, it reduces two applications into one. And there’s still more! This globally proven construction solution from Laticrete also works as an epoxy primer for concrete that can be applied before installing self-leveling underlayment products.
To quote one of the Laticrete product managers, “Laticrete VAPOR BAN PRIMER ER is going to help construction projects whether industrial, commercial or domestic to not only be completed at rapid speeds when moisture issues are present but also be fully designed with colorful flooring options when used as a base coat to enhance the installation“. He also said, “When developing VAPOR BAN ER, our goal was to create a product that offers contractors an alternative for projects that need a moisture vapor barrier and have a tight turnaround“.
Laticrete Vapor Ban Primer ER for sale at Tile Pro Depot guarantees the maximum defense against moisture and the pH sensitivity of the floor coverings. Hence, no further primers or sand broadcasts are required. As for the prices are concerned, it will cost you around $465.33/ container. The solution is compatible with non-water-based epoxy resin to make it easy to be used with stone, tile, vinyl, hardwood, vinyl, rubber, and carpet.
Long story short, Laticrete Vapor Ban Primer ER is an ideal solution to be used in fast turnaround projects like hospitals and schools, or in places where moisture issues are persistent like in below-ground installations. So, if you’ve been thinking of buying Laticrete Vapor Ban Primer ER for your construction sites, be sure to check us out at https://tileprodepot.com/laticrete-vapor-ban-primer-er/. With all product features and technical specifications on the site, you can be sure to make an informed decision.
- Moisture barrier and primer all in one requires no sand broadcast or additional primer turning a traditional two-day installation into one, saving both installation and labor time
- Rapid setting formula, ready for self leveling underlayment (SLU) or wear surface in 3-4 hours
- Best in class open time maintains adhesion performance for 24 hours after application
- Exceeds ASTM F3010 standard with a perm rating of 0.094 grains/h/ft2/in. Hg (5.4 ng/s• m2 • Pa) at only 16 mil thickness
- Reduce MVER ≤25 to below 3lbs/1000ft2/24hrs (170 µg/(s•m2)
- Fast cure: ability to apply finish floor goods, LATICRETE adhesives, NXT® Level and SUPERCAP® self-leveling underlayments in as little as 3 to 4 hours
- Can be used with NXT Overlays – as a primer with sand broadcast for rapid installs