Blanke SECUMAT Mat

TILE PRO RATING: GoodBetterBest

BLANKE SECUMAT is constructed from a fiberglass reinforcing mesh embedded between two layers of polyester fabric.

$233.59 – $725.92

Size

Clear

Item No.: 758-904-15

attribute_pa_size: small-securmat-roll-161-sq-ft-1-39-sq-ft

Item No.: 758-904

attribute_pa_size: large-secumat-roll-538-sq-ft-1-30-sq-ft

Blanke Secumat Antifracture Membrane

The Blanke Secumat Antifracture membrane is an ultra-thin (≈ 1 mm) polyester sheet that fuses uncoupling in a single, job-saving layer. Installed between substrate and tile, it absorbs movement, blocks moisture and delivers crack-free, lifetime performance on both floors and walls. For a step-by-step walkthrough, see our installation guide on underlayment membranes.

Why Professionals Choose Blanke Secumat

Minimal height build-up—ideal under large-format tile or LVT.
Tear-resistant sandwich construction delivers ≈ 468 N tear strength (manufacturer data sheet).
Approved for modified thin-sets meeting ANSI A118.4—pair with LATICRETE 254 Platinum for maximum bond.
Available in 49 ft² and 538 ft² rolls to match any project size.

Technical Data

Roll	Size (W × L)	Coverage
Small	3.28 ft × 49.2 ft	49 ft²
Large	3.28 ft × 164 ft	538 ft²

Quick Installation Steps

Spread a 5/16″ V-notch of modified thin-set.
Embed the membrane fleece-side down; roll flat and back-fill surface.

Complementary & Alternative Products

Need integrated drainage? Match Secumat with the QuickDrain Lines linear drain cover or explore the full range of uncoupling membranes we stock. For manufacturer resources on linear drains, visit the QuickDrain USA site.

Order the Blanke Secumat membrane today and earn Pro Rewards points toward future purchases of grout, thin-set and accessories. Fast shipping from our New England warehouse keeps your project on schedule!

Low elevation
Easy to cut and install
Uses less thinset than other uncoupling products
Provides uncoupling crack isolation properties
Approved for wood and cement substrates
Approved for use of modified thinset with porcelain tile
Approved for all tile sizes including mosaics

Apply loosely mixed modified thinset mortar to the substrate using a 5⁄16″ v-notched trowel.
Apply blanke secumat to the substrate and embed mat with float or roller.*
Work thin-set mortar into the surface of blanke secumat and set the tiles.
Remember to install perimeter joints and blanke expansion joints per tcna guidelines ej171.**

blanke-catalog-2020-21_secumat

Installation Snapshot

Trowel a ANSI-compliant modified thinset with a 5/16″ V-notch.
Embed Blanke Secumat Antifracture membrane print-side up; roll flat.
Fill fleece surface with thinset and set tile immediately—no curing delay!

Need a full step-by-step? See our guide to installing uncoupling membranes.

Reviews

There are no reviews yet.

Be the first to review “Blanke SECUMAT Mat”