Military Discount 
-
-
-
0
Rapid & Reliable: Laticrete HYDRO BAN Cementitious Waterproofing Membrane
$122.30
Item No.: 9259-0030-2
attribute_size: 30LB
The Laticrete HYDRO BAN Cementitious Waterproofing Membrane by Laticrete is a heavy-duty, one-component, polymer-fortified waterproofing material. Designed to mix simply with water, this cement-based membrane provides exceptional protection against both positive and negative hydrostatic pressure. With a rapid 2-hour flood test time and a fabric-free application, it’s the ultimate choice for continuous wet areas like swimming pools, bathrooms, and exterior balconies.
Whether you are building a custom shower, waterproofing a commercial swimming pool, or protecting an exterior terrace, the Laticrete HYDRO BAN Cementitious Waterproofing Membrane delivers professional-grade water protection you can trust.
This advanced one-component system eliminates the need for complicated multi-part epoxies or cumbersome fabric tapes. Simply mix the polymer-fortified powder with water, apply it directly over your substrate, and achieve a watertight seal capable of handling both negative and positive hydrostatic pressure up to 2 BARS (29 PSI) when applied at 40 Mils (1mm) thickness.
Engineered for efficiency, the membrane allows for flood testing in just two hours (at 70°F/21°C) and rapid drying so you can begin tiling faster. It forms a tenacious bond directly to a wide variety of substrates, as well as metal, PVC, and ABS plumbing fixtures. Rated for “Extra Heavy Service,” this membrane exceeds industry standards and ensures your tile, brick, or stone installations are built to last a lifetime.
| Kit Size | Approx. Coverage* |
|---|---|
| 2‑gallon kit | ≈50 ft² at 40 mil wet film |
| 4‑gallon kit | ≈100 ft² at 40 mil wet film |
*Coverage will vary based on substrate porosity and application method.
Use Hydro Ban Cementitious waterproofing membrane on:
Unlike traditional sheet membranes, this brush‑applied coating conforms to complex shapes and penetrations without seams, reducing potential failure points. Professionals appreciate its fast dry time, while DIYers value the straightforward mix‑and‑apply process. Backed by LATICRETE’s industry‑leading warranty, Hydro Ban Cementitious delivers peace of mind for every waterproofing project.
Store unopened kits in a cool, dry location between 40 °F and 90 °F (4 °C–32 °C). When properly stored, Part A powder and Part B liquid maintain a 12‑month shelf life from date of manufacture.
Dispose of any unused mixed material within 30 minutes to prevent hardening in the pail.
For complete technical data, refer to the LATICRETE product datasheet.
To determine approximate delivery time for your order shipped via UPS Ground, please locate the zone where the Ship-To address for your order is located. Note the color of that zone then check the number of days listed next to the color in the Transit Days Chart on the bottom right of the Zone Map. Please note that the delivery time is calculated beginning the day after your order has shipped.
Ultra-Fast Turnaround: Flood testing ready in just 2 hours at 70°F (21°C) or higher.
Fabric-Free Application: Does not require the use of fabric on field application, coves, or corners.
High-Pressure Defense: Handles positive and negative hydrostatic pressure up to 2 BARS (29 PSI).
Extended Workability: Generous 80-minute pot life allows for flexible installation time.
Direct Bonding: Install tile, brick, or stone directly onto the membrane; bonds seamlessly to PVC, ABS, and metal plumbing fixtures.
Pool & Submerged Use: Can be used under pool plasters and is ideal for partially tiled applications (waterlines, tiled swimming lanes, and targets).
Eco-Friendly: GREENGUARD certified and LEED compliant for healthier indoor air quality.
A general guide for the end-user (always advise checking the Technical Data Sheet for precise instructions).
