×

LATICRETE NXT® LEVEL SP

TILE PRO RATING: GoodBetterBest

NXT Level SP is a pourable, high performing self leveling concrete overlay, primarily used to finish interior concrete slabs.

$47.89

Item No.: 9600-0050-21

Laticrete NXT® LEVEL SP is a premium, pumpable, cement-based self‑leveling topping designed for polished concrete and decorative flooring applications. Formulated with carefully graded aggregates, it delivers a high‑strength, low‑alkali surface that is ready for polishing in as little as 24 hours.

Key Features & Benefits

  • Medium / coarse‑sand blend for excellent flow and smooth finish
  • Pumpable or pourable up to 2" (50 mm) in a single lift
  • Walkable in 3–4 hours; polishable after 24 hours*
  • Compressive strength > 6,000 psi (41 MPa)
  • Interior & covered exterior use
  • Low VOC – contributes to LEED® points

Typical Uses

Ideal for commercial, retail, institutional and residential projects where a durable, decorative wear surface is required. Use NXT LEVEL SP over properly prepared concrete substrates prior to polishing, staining or sealing.

Surface Preparation & Installation

Substrates must be clean, sound and primed with NXT® Primer. Mix each 50 lb (22.7 kg) bag with 5.0–5.5 qts (4.7–5.2 L) of clean water and apply with a gauge rake. For complete instructions, download the Laticrete NXT LEVEL SP Product Datasheet.

*Drying and polishing times vary with temperature, humidity and thickness.

Why Choose Laticrete NXT LEVEL SP?

Laticrete NXT LEVEL SP offers contractors a reliable solution when time and surface quality matter. Because Laticrete NXT LEVEL SP can be pumped directly from the mixing station, large areas are covered quickly with minimal labor. Its consistent flow eliminates trowel marks and reduces grinding time, saving you money on every project.

Packaging & Coverage

  • 50 lb (22.7 kg) bags
  • Approx. 24 sq ft at 1/4" (6 mm) thickness per bag

Compatible Sealers & Finishes

After polishing, protect the surface with Laticrete STONETECH® BulletProof® Sealer or your preferred coating system to enhance stain resistance and longevity.

Browse all LATICRETE products ›

  • Provides a durable, attractive and low maintenance cementitious wear-surface grade concrete overlay, suitable for polishing and/or installing floor coatings.
  • Transforms rough concrete to a flat and smooth surface perfect for a polished concrete look.
  • Surface can be tinted using LATICRETE® L&M™ VIVID DYE™ System to coordinate with interior finishes or color-scape branding designs.
  • Surface is walkable in 2 – 4 hours and may be open to wheel traffic within 24 hours at 70°F (21°C). 
  • Polishable to a finished wear-surface in as little as 24 hours. 
  • Pourable and pumpable – available in 50 lb. bags