Tile Leveling System Clips & Wedges – Lippage Eliminator, 100 Pc Bag

Our 100-piece bag of tile leveling system clips and wedges is your go-to solution for eliminating lippage and achieving a perfectly flat tile installation. This system is incredibly easy to use, making it ideal for both professional contractors and DIY enthusiasts. The heavy-duty clips securely hold tiles in place while the reusable wedges are tightened, ensuring consistent spacing and a smooth finish. Say goodbye to uneven tile surfaces and hello to showroom-quality results on floors and walls, with porcelain, ceramic, or natural stone tiles.

Deliver a showroom-quality finish on every project with the Lippage Eliminator. Designed to secure large-format porcelain, ceramic, or natural stone, these tile leveling system clips actively prevent tiles from shifting while the thinset cures. The result is a perfectly flush surface free of unsightly ledges or tripping hazards, significantly reducing the risk of client callbacks.

Speed up your workflow with a design that is intuitive for both seasoned contractors and ambitious DIYers. Simply slide the tile leveling wedges into the heavy-duty clips and tighten them to lock the tile in place instantly. Once the mortar sets, the clips break off cleanly below the tile line, leaving ready-to-grout joints, while the wedges return to your toolbox for the next job. Whether tackling a sprawling floor or an intricate wall, this self leveling tile system clips/wedges set ensures your installation remains dead flat from start to finish.

Benefits Of Using A Tile Leveling System

We’ve all been there, right? You finish a tiling job, step back to admire your work, and then you see it – that slight unevenness, the little lip where one tile meets another. It’s called lippage, and it can really take away from an otherwise great installation. That’s where a good tile leveling system, like our clips and wedges, really shines.

Reduce Callbacks With A Smooth, Even Surface

Honestly, nobody wants to go back to a job site to fix tiles. It’s a hassle for us and annoying for the client. This system is a game-changer for preventing those “oops” moments. By making sure every tile is perfectly flush with its neighbors while the adhesive sets, we eliminate lippage before it even happens. This means fewer callbacks and happier customers who are impressed with the professional finish.

Speed Up Installation Time

Think about how much time we spend trying to get tiles perfectly level, especially with larger formats or rectified edges that don’t have much wiggle room. We’re constantly tapping, adjusting, and checking. Our clip and wedge system simplifies this whole process. You place the tile, slide in a clip, insert a wedge, and give it a gentle tighten. It holds the tile exactly where you want it. This means we can lay more tiles in less time, which is a win-win for everyone involved.

Achieve Showroom-Quality Results

We all want our work to look like it came straight out of a high-end design magazine, don’t we? This leveling system helps us get there. It creates those clean, consistent grout lines and a perfectly flat surface that just screams quality. It’s the kind of detail that separates a good job from a truly outstanding one. It makes even tricky materials like large-format porcelain or natural stone look fantastic.

Using a tile leveling system isn’t just about avoiding problems; it’s about actively creating a superior finished product. It’s a small investment that pays off big in terms of quality and client satisfaction.

Essential Components Of The Lippage Eliminator

Heavy-Duty Clips For Secure Tile Placement

When we’re tiling, the clips are the first line of defense against wonky tiles. They’re designed to be tough, really tough. You slide them under the edge of your tiles, and they create a solid anchor point. This is where the magic starts because it’s the clip that holds everything in position while the adhesive sets. We’ve found that the strength of these clips makes a big difference, especially when we’re working with heavier tiles like large-format porcelain or natural stone. They don’t bend or break easily, which is exactly what we need when we’re trying to get a perfectly flat surface.

Ergonomic Wedges For Easy Tightening

Next up are the wedges. These little guys are pretty clever. They slide right into the clips we just talked about. The design is simple but effective – as you push the wedge in, it pulls the tiles together and levels them out. We like that they’re shaped so you can get a good grip, whether you’re using your hands or a pair of pliers for a bit more leverage. It doesn’t take much effort to get them snug. The key is to get them tight enough to hold the tiles flush, but not so tight that you damage the tile. We’ve used them on countless jobs, and they consistently provide that firm hold we rely on.

Simple Removal After Thinset Cures

Once the thinset or adhesive has fully cured – and we always wait the recommended time, usually 24 hours – it’s time to remove the clips and wedges. This part is surprisingly easy. Usually, a few firm taps with a rubber mallet or even just kicking the clips sideways is enough to break them free. The wedges pop out, and the clips snap off cleanly. We appreciate that this system doesn’t leave any mess behind. It leaves us with perfectly spaced grout lines and, most importantly, a completely flat tile surface. It’s a clean finish every time, which saves us time on cleanup and touch-ups later on.

Tips For Optimal Performance With Tile Leveling Systems

Pair With Premium Thinset And Proper Substrate Prep

Getting the best results from our tile leveling system really starts before you even place the first tile. We always recommend using a good quality thinset mortar. Don’t skimp here; a cheap mortar can lead to tiles popping loose later, and that’s a headache nobody wants. Also, make sure your subfloor or wall surface is totally clean, dry, and flat. Any bumps, dust, or moisture can mess with how the thinset bonds and how well the leveling system works. We’ve found that taking the extra time for prep saves us a lot of trouble down the line.

Ensure Correct Wedge Insertion For Maximum Hold

When you’re pushing the wedges into the clips, you want to get them in there snug, but not so tight that you crack the clip or damage the tile edge. The goal is to have the wedge firmly hold the tile down and keep it level with its neighbors. We usually just use our hands for this, but if you’ve got really tough clips or thick wedges, a pair of pliers can help. Just be gentle. The wedge should slide in smoothly and create even pressure. It’s all about getting that perfect, flush surface.

Properly Clean Grout Joints After Removal

Once the thinset has fully cured – and this is important, don’t rush it! – it’s time to break those clips free. A good whack with a rubber mallet or the heel of your boot usually does the trick. After the clips are off, you’ll often have a little bit of plastic left in the grout joint. We like to use a utility knife or a grout saw to clean this out. It makes a big difference for the final look, giving you nice, clean lines for your grout. It really makes the whole installation pop.

Product Description:
Our 100-piece bag of Tile Leveling System Clips & Wedges is designed to help you achieve a professional, lippage-free tile installation every time. This system is perfect for both DIYers and professionals looking to eliminate uneven tile surfaces, especially with large-format and rectified tiles. The heavy-duty clips and reusable wedges work together to hold tiles securely in place while the adhesive cures, guaranteeing consistent joint spacing and a smooth finish.

Want your tiles to look super smooth and even? Using a tile leveling system is key! These tools help make sure your tiles sit perfectly flat, avoiding any bumpy spots. It’s like giving your floor a professional polish. For the best results and to learn more about keeping your tile projects looking amazing, check out our website today!

Frequently Asked Questions

What exactly is this tile leveling system?

It’s a set of clips and wedges we use to make sure our tiles are perfectly flat and even. We put clips under the edges of the tiles and then use wedges to push them together. This stops any tiles from sticking up or sinking in while the glue dries.

Why should we use this system instead of just tiling normally?

Using this system helps us avoid ‘lippage,’ which is when one tile edge is higher than the next. It gives us a super smooth, professional look, especially with big tiles or tiles that have very straight edges. It makes our work look way better.

Is this system difficult to use?

Not at all! It’s really straightforward. We just place the clips, set the tiles, slide the wedges in, and tighten them up. It’s designed to be quick and easy, saving us time on the job.

Can we use these clips and wedges on any kind of tile or surface?

Yes, they work great for most common tiles like ceramic and porcelain, and even natural stone. We can use them on both floors and walls, inside and outside, as long as the glue we use is right for the job.

Are the wedges something we can use more than once?

Definitely! The wedges are built to be tough and reusable. Once the tile glue is dry, we can easily pop the clips off and save the wedges for our next project. It saves us money in the long run.

What happens after the tiles are set with the system?

Once the thinset (the tile glue) is completely dry, we simply break off the clips. The wedges help keep everything perfectly aligned, so when the clips are gone, we’re left with nice, even grout lines and a perfectly flat surface ready for grouting.