Laticrete Permacolor Grout is a high performance, fast setting grout. This Laticrete Permacolor grout provides a dense and hard grout joint and is best suited for joints 1/16″ to 1/2″ (1.5mm – 12mm) wide on floors or walls.
There are a great variety of Laticrete Permacolor grout colors, 40 options to be exact, so you can be sure you have the perfect grout to suit every customer’s preferences. At Tile Pro Depot, we even provide a Permacolor grout color chart so you can show your clients their options, as well as take a look at the many colors you can carry and offer during your installs.
One of the great benefits of installing tile with Laticrete Permacolor grout from Tile Pro Depot is that you can now purchase the uncolored grout base with just the amount of grout coloring needed for the job. This means not only will there be less waste of product – because you won’t need to throw away unused grout at the jobsite or partial bags of open grout in your warehouse – but also less waste of your valuable dollars.
Apart from being able to purchase the appropriate amount of Laticrete Permacolor grout and coloring for each job, there are many other advantages to using Laticrete Permacolor Grout.
Here are some advantages to using Laticrete Permacolor Grout:
- consistent color – minimizes efflorescence
- fast setting – can handle foot traffic in as little as three hours
- only needs to be mixed with water – no need for additives
- ideal for residential, commercial, interior, and exterior applications
- outfitted with anti-microbial technology
- improved stain resistance – equipped with Stonetech Sealer Technology
- strengthened with Kevlar – ensures crack and shrink resistance
- comes with the Laticrete Lifetime Warranty
How to use Laticrete Permacolor Grout
When installing any of the Laticrete grout colors, it’s important to prep your surface appropriately so the product performs optimally. Remove all spacers and clean off dust and dirt using a wet sponge, taking care to not over wet the area. Mix the grout using approximately 2-2 ¼ quarts of clean water for every 25 pounds of grout with a slow speed drill mixer for one minute, let it sit for five minutes, and then remix with the drill for one more minute.
Apply the grout with a firm rubber grout float or wall float for narrow wall joints, removing excess as you work. Allow to dry for 35-40 minutes before the initial cleaning. To clean, lightly wipe down the area with a damp sponge, working diagonally to the joints. Allow to dry for three hours before going in for the second cleaning with a damp sponge or dry cloth to remove any remaining grout haze.
At Tile Pro Depot, we carry all the tools and products you need to do a complete tile install. Whether it be Laticrete Permacolor grout, tile cutters, cleaners, caulks or sealants (we carry a large assortment of Laticrete caulk colors), you’ll find everything in one convenient location.
Buy Laticrete Permacolor Grout from Tile Pro Depot
Visit our website to place an order and to view our wide selection of products. If you have any questions, feel free to contact us online or by phone at (844) 751-2625.
[…] how to use Laticrete Permacolor grout, […]